Accessories

Standard BNC to Alligator clips test leads.

• 50 ohm impedance
• RG58C/u cable
• 500Vrms voltage rating
• 40" cable length

General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches

Model CC545 General Purpose Power Supply Accessory Kit provides almost everything one needs to put their bench power supply to work. The kit includes 3 high-capacity test leads with retractile sleeve plugs. Rated at 600 V CAT II and 36 Amps, the leads provide safe connection to either standard or sheathed jacks while its silicone jacket wire stays flexible under all conditions.

For day-to-day connections, included are 4/6mm spade lug adapters along with 4mm banana plug adapters. Unique to the kit are 3 extra-large alligator clips which offer a wide range of connection capabilities. Fully insulated 1,000V CAT III or 600V CAT IV, the clips are capable of attaching to leads as small as 0.01" or lugs to a diameter of 1.25" all while carrying currents up to 36A. All components are supplied in black, red, and green for easy identification.

Also included is a BNC female to double banana plug adapter, a BNC male to double binding post adapter, and a BNC male cable assembly for powering those RF testing applications.

Features:

• High Capacity Retractile Sheath Leads
• Connection Adapters
• Extra-large insulated alligator clips
• Black, red & green components
• Storage case

Applications:

• R&D Laboratories
• Production Test Stations
• Service & Repair Facilities
• Educational Test Benches

• Converts any DMM to a current clamp
• Measures current without disconnecting circuit under test
• Measures to 400A DC/AC
• Outputs 1mV per Amp, operates on 2V range of any DMM

The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.

• 50 mA to 100 A peak
• DC to 300 kHz

The CT 2701 coaxial connector adapter kit provided convenient solutions to most interconnection needs. The Universal Coaxial Adapter Kit, with its 6 universal adapters, allows assembly of hundreds of different coaxial adapters; in-series and between series. All pieces are machined brass with Teflon dielectrics and gold plated center contacts. Whether field service or bench, this kit provides an easy solution to coaxial connection requirements.

• 24 Coaxial Connectors; 6 Universal Adapters
• Gold plated center contacts
• Frequency Range: DC to 1GHz
• VSWR

• Made in the U.S.A.
• Light weight, durable Cordura nylon
• Protects your instruments
• Room to hold your test leads
• Approximate Internal Dimensions: 3.75 x 1.5 x 6.75" (95 x 38 x 171mm)

• Light weight, durable Cordura nylon Protects your instruments
• Made in the U.S.A.
• Room to hold your test leads
• Approximate Internal Dimensions: 4" x 2.5" x 8" (102 x 64 x 203mm)

• Made in the U.S.A.
• Light weight, durable Cordura nylon
• Protects your instruments
• Room to hold your test leads
• Approximate Internal Dimensions: 5 x 1.75 x 10.5" (127 x 44 x 267mm)

• 250MHz Bandwidth
• X100 Attenuation
• 48" (1.2m) Cable length
• Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
• IEC61010-2-031

If the voltages you need to measure are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you.

• 40,000VDC or 20,000Vac Max input voltage
• X1000 Attenuation
• 1000M ohms Input Impedance
• 60Hz Bandwidth
• 48" (1.2m) Cable Length

• 15/90MHz Bandwidth
• X1/X10 Attenuation
• 48" (1.2m) Cable length
• Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter.
• IEC61010-2-031